Lincoln SL-6 Single-Line Grease Injector

Description

The SKF Lincoln SL-6 injector has been designed for ease of use and maintenance in mind, with outstanding leak protection and service life, even with harsh EP (extreme pressure) greases. The SL-6 can easily be retrofitted to existing single-line pump systems.

 

Innovations in the SL-6 are focused on supporting the harsh environments for which it is designed, including in dump trucks, excavators, and other mining and construction equipment. Quick maintenance features include a highly visible red indicator pin, an adjusting screw requiring only basic tools, and a hex-shaped body that maximizes working space, making it easy to handle and work with.

 

For optimally effective lubrication, its vent speed is faster than that of any competitor. This is aided by a daisy-chain effect: as soon as each injector finishes venting, it helps the next one to complete its cycle by consuming grease from the mainline. Improved sealing reduces the risk of lubricant bypass. In the unlikely event of a failure, the injector’s closed structure channels bypass lubricant to the bearing. Repair is then possible by simply replacing two components.

Specs

Function Principlemetering device/lubricant injector
Outlets1 to 6
Metering Quantity0.015 to 0.305 in.3 (0.25 to 5.00 cm3)
Lubricantgreases up to NLGI 0, 1, 2
Operating Temperaturemax. +180°F (max. +82°C)
Operating Pressure1,850 to 6,000 psi (128 to 413 bar)
Relief Pressure1,000 psi (70 bar)
MaterialCarbon Steel
Connection Main Line3/8 NPTF (F)
Connection Outlet1/8 NPTF (F)
DIMENSIONS
Minimum2.5 x 9.9 x 1.4 in. (63 x 251 x 35 mm)
Maximum8.0 x 9.9 x 1.4 in. (203 x 251 x 35 mm)
Mounting PositionAny
Be the first to review this product
Add your review: